Products

Solar Home lighting system is mostly used in rural areas, small shops, security posts and non-electrified areas. It is designed with a solar power generating system which produces solar energy & stored in batteries and used as per requirement. Major component are solar panels, battery, charge controller or inverter.

  • PV Modules
  • Charge Controllers
  • Batteries
  • Cables
  • Protection system
  • It can save electricity bill up to 90% annually.
  • Auto on/off with dusk to down features.
  • Auto charging with indicator. 
  • 4 hours full back up.
  • IP65 Certified.
  • Portable system.
  • Maintenance free system.

Solar water pumping system is broadly used for agri-irrigation, drinking water treatment plant, industries etc. It is designed in such a way where power source is solar energy. There is no major difference between traditional pump except source of power. The plant capacity depends upon power requirement to run the motor of pump.

  • PV modules
  • VFD/Pump Controller
  • Module Mounting Structure (MMS)
  • Balance of System (BOS)
  • Protection system
  • Save 100% electricity bill for 30 years.
  • Own power source which can be used as per requirement. 
  • Noise free powers supply i.e. no power fluctuation, no voltage drop.
  • No approval required from utility/grid.
  • Solar pump also can run in hybrid mode.
  • Almost zero maintenance cost.

Solar water heater is a system which riveting heat component of sunlight to heat the water of a tank. It is largely used by residential, hospitals, hotels, industries etc. Solar water heater is installed in an open space where it can get adequate sunlight directly and normal water flows through tube/plate & absorbing the heat from the sunlight. Then the hot water is stored in the insulated tank.

We are ISO 9001:2015 certified & MNRE standard manufacturer of solar water heater of both type i.e. ETC & FPC. Available model: 100L/200L/300L & 500L for residential user and 1000L/2000L for commercial/industrial user.

  • Cladding material: GI Powder coated.
  • Material-Tank Mild steel with 4.0mm thickness.
  • Circulation: Thermo siphon.
  • Collectors (Qty): 10 Nos/100L
  • Header size: 25.4 mm.
  • Aperture area: 1.0 sq.m
  • Reflector foil: Aluminium, 50 microns
  • Header material: Copper
  • Riser material: Copper
  • Solar collectors: Selectively coated.
  • Glass: Toughened glass, 4mm thick.
  • Sealing: EPDM rubber.
  • Gaskets: EPDM rubber.
  • Hardware: Stainless steel screws.
  • It can save electricity bill up to 90% annually.
  • 24 hours hot water supply. 
  • Benchmark temperature range from 60°C to 85°C available.
  • Almost zero maintenance cost.
  • MNRE Standard.
  • 100% GI tank with powder coated. 

Solar High-must lights are kind of street lights which are designed with 4/6 no of LED lights and similar no of solar panels, charge controllers, batteries and a polygonal pole. The system is configured in such a way where LEDs are setting multiple directions & angles as per site requirement. 

Solar panels are using to generate power from sunlight and store in batteries through charge controller. Then the stored power is used as per requirement. We are ISO 9001:2015 certified manufacturer of solar High-must which has inbuilt auto on/off, dusk-to-down, motion sensor features & IP65 standard.

  • 4 no of PV Modules
  • 4 no of Charge Controllers
  • 4 no of Batteries
  • 8M Octagonal Pole with MMS
  • Balance of System (BOS)
  • Protection system
  • It can save electricity bill up to 90% annually.
  • Auto on/off with dusk to down features.
  • Motion sensor available with selected model.
  • Noise free system.
  • IP65 Certified.
  • 100% GI pole & MMS.
  • Maintenance free system.

This system is the most popular technology and it is broadly used by residential or commercial or industrial user to reduce electricity bill up to 90% annually. This type of plant is connected to utility grid and power generated by solar power plant is transmitted to grid/DISCOM through grid tie inverter & the grid/DISCOM supply the power to the consumer as per demand or requirement. Net meter keeps record for grid feeding which is generated by solar power plant & consumption by consumer.

  • PV modules
  • Grid tie inverter
  • Module Mounting Structure (MMS)
  • Balance of System (BOS)
  • Protection system
  • Remote monitoring System.
  • By installing grid tie system, one can save electricity bill up to 90% annually.
  • PV module’s life 30 years (warranty).
  • Almost zero maintenance cost.
  • Solar Rooftop is a secure investment & higher ROI.
  • Increase the commercial value.
  • Tax benefit as capital expenditure.
  • Shrink your Carbon footprint.
  • Does not take extra space.
  • Suitable for all climates.

Hybrid solar power system is broadly used as emergency power supply, unstable grid areas, medical labs, security system etc. It is a combination of On-Grid and Off-Grid technologies. A hybrid system is a dynamic system that exhibits both continuous and discrete dynamic behaviour – a system that can both flow (described by a differential equation) and jump (described by a state machine or automaton).

The power generated by solar power plant is stored in a storage system through hybrid grid inverter. After that the storage power is used by the consumer when required. A hybrid inverter can use multiple source of power as per pre define priority to charge the storage.

  • PV Modules
  • Hybrid Inverter
  • Module Mounting Structure (MMS)
  • Balance of System ((BoS) 
  • Protection system 
  • Battery for storage
  • Save 100% electricity bill for 30 years.
  • Own power source which can be used as per requirement. 
  • Noise free power supplies i.e. no power fluctuation, no voltage drop.
  • No approval required from utility/grid.
  • Low maintenance cost.

It is a standalone system with storage. It is can work independently and normally off grid system is used in no grid areas or unstable grid areas. The power generated by solar power plant is stored in a storage system through Off-Grid inverter/charge controller. After that the storage power is used by the consumer when required.

  • PV Modules
  • Off-Grid Inverter
  • Module Mounting Structure (MMS)
  • Balance of System ((BoS) 
  • Protection system 
  • Battery for storage
  • Save 100% electricity bill for 30 years.
  • Own power source which can be used as per requirement. 
  • Noise free power supplies i.e. no power fluctuation, no voltage drop.
  • No approval required from utility/grid.
  • Low maintenance cost.

Solar street lights are kind of street light which designed with a power generating source from sunlight. Major components are solar panel, charge controller, battery, LED luminary and pole. As per market demand, we are manufacturing 2 types of solar street light i.e. Semi Integrated system & All-in-One street light system.

Semi Integrated system: we are ISO 9001:2015 certified manufacturer of solar street light. Semi Integrated Street light is designed in such a way where luminary, charge controller & lithium battery are integrated in a system. Available model: 9W to 30W with inbuilt auto on/off, dusk-to-down, motion sensor features & IP65 certified.

  • PV modules
  • Charge Controller
  • Battery
  • pole
  • Balance of System (BOS)
  • Protection system
  • By installing grid tie system, one can save electricity bill up to 90% annually.
  • Auto on/off with dusk to down features.
  • Motion sensor available with selected model.
  • Noise free system.
  • IP65 Certified.
  • 100% GI pole & MMS. 
  • Maintenance free system.

Solar street lights are kind of street light which designed with a power generating source from sunlight. Major components are solar panel, charge controller, battery, LED luminary and pole. As per market demand, we are manufacturing 2 types of solar street light i.e. Semi Integrated system & All-in-One street light system.

All-in-One system: we are ISO 9001:2015 certified manufacturer of solar street light. All-in-One Street light is designed in such a way where luminary, charge controller, lithium battery & solar panel are integrated in a system. Available model: 9W to 30W with inbuilt auto on/off, dusk-to-down, motion sensor features & IP65 standard.

  • PV modules
  • Charge Controller
  • Battery
  • pole
  • Balance of System (BOS)
  • Protection system
  • By installing grid tie system, one can save electricity bill up to 90% annually.
  • Auto on/off with dusk to down features.
  • Motion sensor available with selected model.
  • Noise free system.
  • IP65 Certified.
  • 100% GI pole & MMS. 
  • Maintenance free system.

Solar garden light is mostly used for garden beautification. It is designed with a solar panel which produces solar energy & stored in a battery and uses it to illuminate different places of a garden. All the components are integrated in a frame.

  • PV Modules
  • Charge Controllers
  • Batteries
  • LED lights
  • Cabinet
  • Light Stand
  • It can save electricity bill up to 90% annually.
  • Auto on/off with dusk to down features.
  • Auto charging with indicator. 
  • 8 hours full back up.
  • IP65 Certified.
  • Portable system.
  • Maintenance free system.

Solar lantern is mostly used as small portable lighting system. It is designed with solar power generating systems which produces solar energy & stored in a battery and uses to illuminate dark places. All the components are integrated in a cabinet. 

  • PV Modules
  • Charge Controllers
  • Batteries
  • LED lights
  • Cabinet
  • Light Stand
  • It can save electricity bill up to 90% annually.
  • Auto on/off with dusk to down features.
  • Auto charging with indicator. 
  • 8 hours full back up.
  • IP65 Certified.
  • Portable system.
  • Maintenance free system.